MF-NY series use nylon microporous membrane as its main material. The pore size of nylon membrane is very serried and its retension rate reaches more than 99%. We use food-grade materials, sanitary and safe. The housings, core support and end caps all all use hot melting sealings, no adhesive. All products are manufactured and sealed in dust-free workshops which meets high standards of medicine and industry and micro-electronics.
●Specifications：
◎Material：Ny6
◎Support/Diversion Layer：PP
◎Cage/Core/End Cap：PP
◎OD：Ø68mm , 83mm
◎Filtration Area：0.55m²/10"
◎Micron Rating：0.1、0.22、0.45、1、3 (µm)
◎Efficiency：≥99%
◎Length：5"（125、127mm）、10"（250、254mm）、20"（500、508mm）、
30"（750、 762mm）、40"（1000、1016mm）、50"、60"、70"
◎Sealing Material：Silicone, Buna, EPDM, Viton
◎Maximum Operating Temperature：≤80°C
◎Maximum Operating Differential Pressure：0.4Mpa@room temperature
◎Sterilization Condition：121°C 30Min
◎Connector：Single Open End、DOE、226/Fin、226/Flat、222/Fin、222/Flat、
Inside O-ring/Flat、ThreadsM30，M36
●Product Features：
◎Good hydrophilicity , uniformly pore size, high toughness.
◎Higher retension rate， more than 99.9%.
◎Acid and alkali resistan，chemical resistance.
◎Food-grade materials, sanitary and safe . Manufactured and sealed in dust-free workshops.
●Applications：Medical Sovents；Chemical Organic Sovents、Plating Sovents；Domestic Water、Mineral Water、Beverage、Liquor；Reverse Osmosis System Pre-filtration of Electronics; Deionized Water system Pre-filtration; Gas Filtration; Photoresist.
●Product Order：Length+MF-NY+Micron Rating+Connector Type+Gasket
